What is thermostat function for generator set

1: The thermostat is installed in the cooling system to keep the coolant temperature in a certain temperature range。

2:The cooling system consists of an internal cycle and an external cycle passing through the radiator。

3:When the engine is cooling or during its heating process, the thermostat is turned off. All the coolant is circulated in the internal circuit to warm the engine to the properate operating temperature as quickly as possible.

4:When the engine is at the highest load and the ambient temperature is high, the thermostat will be fully opened. The internal circulation is completely closed, and all the cooling warm liquid circulates through the radiator.

 

What will happen if the thermostat is removed?

A:It takes a long time to warm the engine to the normal operating temperature, and the engine cannot reach the normal operating temperature when the idling speed and the ambient temperature are not high.

B: The lubricating oil temperature of the engine does not reach the correct level, so that fuel consumption increases, while emissions also increase , and the output of the engine decreases slightly. In addition, the increased wear of the engine reduces the life span.

C:When not all the cooling water passes through the radiator, the cooling capacity of the system will also decrease. Even if the thermometer shows the correct water temperature, local boiling will still occur in the engine water jacket.

D:Engines run without thermostat are not covered by the quality warranty.

USE THE RIGHT RADIATOR AND THERMOMETER TO PROTECT YOUR ENGINE.


Post time: Feb-15-2022
WhatsApp Online Chat !